Skip to main content

E62-3HF

AC Capacitors for High Frequency Filters

It is the perfect evolution of our renowned E62-3ph series: E62-3HF answers the growing demand for single and three-phase AC capacitors that can absorb AC currents in the kHz range.

产品数据库

在 "具体零件号 "栏中输入一个完整或部分的已知项目编号,然后开始搜索。 或者,你可以根据第2行的技术标准开始进行一般或预过滤的搜索。
请注意,由于技术原因,我们的数据库每天只能更新一次。因此,关于库存水平的信息应被视为以临时销售为准。

Please send your enquiry

E62-3HF with CAPAFIX™ and CAPASTUD™ terminals - the perfect AC Capacitor for High Frequency Filters

E62-3HF answers the growing demand for single and three-phase AC capacitors that can withstand AC currents in the kHz range. With their high AC load capacity, they are designed especially for heavy duty operation in extreme or sophisticated operating conditions, such as AC filtering and power factor correction in wind power and UPS applications, harmonic filtering in three-phase mains with high or unusual levels of harmonic distortion, a.m.o.

Thanks to their construction, they have a very low series resistance and a small self-inductance. Our basic design principle - preferring short winding elements with comparably large diameters - as well as the use of wavecut technology in many models, serves for high rms and surge current strength.

The three capacitor elements are connected in delta internally; the plant oil filling is environmentally friendly and serves for optimized heat dissipation and improved internal insulation. Very good self-healing characteristics and the integrated overpressure protection ("BAM") ensure safe operation and controlled disconnection in the event of overload or failure at the end of operating life.

CAPAFIX™ is the new name of our optimized low-loss TORX terminals which can operate safely even at very high frequencies. They are also preferred by some as a flat alternative to the traditional, taller CAPAGRIP™ terminal of the E62-3ph series. The two sizes of CAPAFIX™ – Z3 (up to 39A per phase) and S4 (up to 56A/phase) – are complemented by the robust CAPASTUD™ with M10 studs that can withstand up to 100A per phase.

Both CAPAFIX™ terminals can be completed with an optional snap-on cover for protection from accidental contact (similar to IP10).