Skip to main content


“What do I actually need?” We know best what data is required to match a capacitor to your application properly. Answer the questions on our form step by step. This way, we all save time and avoid misunderstandings.

Enquiry Form


Please give the application a shortname for identification in our correspondence
Please briefly describe the application (e.g. "energy storage capacitor in voltage sourced converter", "DC link in traction converter", "filter capacitor in UPS", etc.). If we know which job the capacitor has to fulfill, then we know which standards apply, and which special conditions may be important.
Without such indication, we are unable to evaluate the priority of this enquiry and possible cost of tooling, adaptations, etc.
Based on your data, we shall suggest the most suitable shape and design. Please state if have certain preferences.
If you require several partial capacitances within one capacitor, separate each required value separated by "+". Please state positive and negative tolerances if our standard 10% is not acceptable, and explain why it is important.
If you have special wishes for the application, configuration, etc., you can upload a sketch or an equivalent circuit diagram here